CTC Union Clatronic AR 737 USB/TFT Instruction Manual & Guarantee page 26

Stereo car radio with usb & tft monitor
Table of Contents

Advertisement

Available languages

Available languages

NOTE:
The scan function ends automatically at the fi rst
storage location of frequency band FM1.
In DVD mode:
If the SEL button is moved briefly in the direction of APS, the
TFT monitor at the device is switched off or on.
12-17. Station buttons (1–6) of preselected stations and as
1TOP, 2RPT, 3INT, 4 RDM buttons during CD operation
a) Radio Operation
Pressing these buttons briefl y directly selects a preset
radio station. If these buttons are pressed for more than
one second, the station currently being listened to is
stored under the selected station button.
b) CD Operation
Pressing briefl y directly selects the corresponding
CD/MP3 track. Keep the corresponding button (1TOP,
2RPT, 3INT, 4RDM) pressed for approximately
3 seconds in order to switch the following functions on
and off:
Press the 1TOP button to jump to the fi rst track of
the CD/MP3.
NOTE: No function during DVD operation.
Press the 2RPT button. The track currently being
played is repeated. Press this button again to cancel
this function. In the case of DVDs you can repeat
the chapter, title or the entire DVD.
Press the 3INT button. Each track on the CD is
played for 6 seconds. Press this button again to stop
searching. The currently selected track is played.
During DVD operation a menu appears. Here you
can use the , , ,
control to choose between 4 options. Confi rm your
selection with the ENTER button (27).
NOTE: No function during MP3 operation.
Press the 4RDM button. The DVD, MP3/CD tracks
are played at random. Press this button again to
cancel this function.
18.
II-/PTY button
Radio Operation:
PTY Selection of the Programme Type
Besides the station name, some FM stations also transmit
information on the type of programme. This information can
be displayed by your car radio.
Examples of such types of programme are:
SPORT
NEWS
With the PTY function you can specifi cally select stations
transmitting a particular type of programme. Press the
II-/PTY button repeatedly to call up the PTY selection
menu. The message „PTY SEEK" then appears briefl y in
the display.
26
05-AR 737 DVD_GB 26
19. TA / AF button
buttons (14) of the remote
20.
21. ST button
POP
CLASSICS
When PTY has been selected the radio starts searching for
corresponding PTY information and stops when the PTY
information has been found. If the programme type being
searched for is not found, „NO PTY" appears in the display.
If the PTY information being searched for no longer exists,
the PTY function automatically switches to normal mode.
CD/DVD/USB Operation:
Press the II-/PTY button to interrupt playback of the CD
(pause function). Press this button again to cancel this
function.
a) TA Traffi c Annonuncement
(Priority for Traffi c Information)
The TA function is activated by pressing the TA button
briefl y. The TA symbol appears in the display. During
radio operation in one FM frequency band the search for
a traffi c announcement station is started automatically
(TA SEEK).
If an FM station is being received which transmits the
latest traffi c announcements from time to time, the TP
display lights up.
When the TA function is switched on, the FM traffi c
announcements automatically interrupt CD operation
(The word TRAFFIC appears in the display). The
volume level is increased to the minimum value for the
transmission of traffi c announcements.
After the traffi c announcement has fi nished, the
programme that was previously running is resumed.
Interruption of the TA Function:
If you would like to interrupt the current traffi c announce-
ment, press the TA button briefl y. This does switch
off the TA mode.
b) AF (Alternative Frequencies)
See point 3.
button (Operating unit angle)
You can change the viewing angle of the operating unit.
Press the
button up to four times in order to select the
desired position.
NOTE:
Do not place your fi ngers behind the operating unit. There
is a danger of injury if the operating unit returns to the
normal position.
Radio Operation:
STEREO/MONO switching
DVD Operation:
For selecting the audio languages, provided that various
languages are present on the DVD.
CD Operation:
For selecting between stereo, mono left, mono right and
MIX mono.
21.08.2006, 11:50:03 Uhr

Advertisement

Table of Contents
loading

Table of Contents