CTC Union Clatronic AR 737 USB/TFT Instruction Manual & Guarantee page 23

Connect the device as shown in the diagram.
Antenna connection
Red
Ignition (B+)
Yellow
Constant current
connection (B+)
Black
Earth (B-)
Automatic
Blue
antenna
Loudspeaker,
front left
Loudspeaker,
rear left
Note:
• The device should only be switched on after all cables have
been connected.
• Please use loudspeakers with an impedance of 4 ohm.
• The loudspeaker cables must be unearthed.
• If a subwoofer is connected, an amplifi er is required.
• The earth connection cable (handbrake B-) must be
connected in order for DVD pictures to be played back to the
monitor. If the cable has not been correctly connected, the
message „PARKING BRAKE" appears on the monitor.
05-AR 737 DVD_GB 23
Connection
ISO connection
Fuse/
fi lter box
(Only about version at RCA output cable)
Fuse
White
White/black
Grey/black
Green
Green/black
Violet/black
White
Green
Yellow
AUX (optional)
RCA cable
RCA cable / output
rear (optional)
RCA cable / output
front
Grey
Loudspeaker,
front right
Violet
Loudspeaker,
rear right
• It is possible to use the integrated TFT screen as a monitor
for an optional reversing camera (not supplied). Connect the
„(B+) 12V camera rear" connection to the reversing light
of your vehicle and connect the camera to „camera input on
rear (yellow)". After the vehicle is put into reverse gear the
camera image appears on the monitor. For more detailed
information please see the operating instructions for your
reversing camera.
If the 12V is missing at the "(B+) 12V camera
NOTE:
rear" connection the camera picture is not shown on the
monitor.
(B+) 12 V
Camera rear
(B-) Hand brake
Camera input rear
Video input rear
Audio input R (red)
Audio input L (white)
Subwoofer (grey)
Video output 2 (yellow)
Coaxial output (brown)
R red
L white
RCA front right (red)
Video output 1 (yellow)
RCA front left (white)
23
21.08.2006, 11:49:57 Uhr