Installation Setup; Steering Wheel Position Setting; Mute Setting; Idatalink Setting - Alpine iLX-407 Owner's Manual

Installation Setup

[Installation] is selected on the General Setup Menu
screen.
Vehicle Setup enables you to check the connection status of
Reverse Lead/Parking Brake Lead.
When selecting the item, the Installation check screen is
displayed.
Setting item:
Installation
Setting contents:
Reverse / Parking Brake

Steering Wheel Position Setting

[Steering Wheel Position] is selected on the General Setup
Menu screen.
Set this item when Apple CarPlay is used/Android
smartphone which installed Android Auto App is
connected.
This setting influences Apple CarPlay/Android Auto mode.
Setting item:
Steering Wheel Position
Setting contents:
Left (Initial setting) / Right

Mute Setting

[Mute While Backing Up] is selected on the General Setup
Menu screen.
You can set the sound will be muted automatically when
the gear lever is moved to the reverse (R) position.
Setting item:
Mute While Backing Up
Touch [ ] (Off) or [
While Backing Up".
] (On) of "Mute

iDatalink Setting

[iDatalink] is selected on the General Setup Menu screen.

Setting the Default Vehicle Screen

You can set the Default Vehicle Screen displayed in
iDataLink mode.
Setting item:
Default Vehicle Screen
Setting contents:
Gauges / Climate / Parking Assist / Vehicle Info. / Last
Mode (Initial setting)
• Depending on the car, some setting contents or this setting
item may not be displayed.

Setting the Parking Assist Enable

You can set up the camera for Parking Assist.
Setting item:
Parking Assist Enable
Setting contents:
Off (Initial setting) / Primary Camera / Secondary Camera

Setting the Maestro Module

You can change the setting of the connected iDataLink
module.
Setting item:
Maestro Module
• This setting is only available when the iDataLink Maestro®
module (sold separately) is connected.
• Depending on the iDataLink module, the setting contents may
differ.
19
-EN