Alpine iLX-407 Owner's Manual page 62

USB SECTION
USB requirements USB 2.0
Max. Power Consumption
1,500 mA (CDP Support)
USB Class USB (Play From Device)/
USB (Mass Storage Class)
File System FAT16/32
Number of Channels
2-Channels (Stereo)
Frequency Response*
1
5 – 20,000 Hz (±1 dB)
Total Harmonic Distortion
0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio
100 dB
Channel Separation 85 dB (at 1 kHz)
*1 Frequency response may differ depending on the
encoder software/bit rate.
HDMI SECTION
Input Format 720p/480p/VGA
Bluetooth SECTION
Bluetooth Specification
Bluetooth V4.1
Output Power +4 dBm Ave. (Power class 2)
Profile HFP (Hands-Free Profile)
PBAP (Phone Book Access Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
GENERAL
Power Requirement 14.4 V DC
(11–16 V allowable)
Operating temperature
-4°F to +140°F
(-20°C to + 60°C)
Power Output 16 W RMS × 4*
*2 Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and ≤ 1% THD+N
• S/N: 70 dBA (reference: 1 W into 4 Ohms)
Weight 1.0 kg (2 lbs. 3.3 oz)
62
-EN
2
Audio output level Preout (Front, Rear):
ohms (max.)
Preout (Subwoofer):
ohms (max.)
CHASSIS SIZE
Width 178 mm (7")
Height 100 mm (4")
Depth 60 mm (2-6/16")
• Due to continuous product improvement, specifications and
design are subject to change without notice.
• The LCD panel is manufactured using an extremely high
precision manufacturing technology. Its effective pixel ratio is
over 99.99%. This means that there is a possibility that 0.01%
of the pixels could be either always ON or OFF.
4V/10k
4V/10k