Presetting Stations Manually; Presetting Stations Automatically; Tuning To Preset Station; Receiving A Multicast (Hd Radio™ Mode Only) - Alpine iLX-407 Owner's Manual

Presetting Stations Manually

1
Tune in a desired radio station you wish to
store in the preset memory by manual or
automatic seek tuning.
2
Touch and hold the Preset number you want
to store for at least 1 second.
The selected station is stored.
3
Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 stations can be stored in the preset
memory
(6 stations for each band; FM1, FM2 or AM).
• If a preset memory has already been set in the same preset
number, it will be cleared and the new station will be
memorized.

Presetting Stations Automatically

The tuner can automatically seek and store 6 strong stations
in the selected band in ascending order of frequency.
Select the desired band then touch and hold
[A.Memo].
The tuner automatically seeks and stores 6 strong stations
into the preset buttons in ascending order of frequency.
When automatic storing has completed, the station stored
in the preset 1 is selected.
• If no stations are stored, the tuner will return to the original
station you were listening to before the automatic storing
procedure began.
• You can cancel this process by touching [A.Memo] while the
tuner is automatically seeking stations. Canceling will return
the tuner preset to the previous setting.

Tuning to Preset Station

After selecting the desired band, touch the
desired preset button.
The preset station is received.
Receiving a Multicast (HD Radio™
Mode only)
Multicasting is the ability to broadcast multiple program
streams over a single FM frequency. This increases the
amount and diversity of content choices. A maximum of 8
multicast station channels can be selected on this unit.
• Multicast station channels indicator appears when signal
reception is possible.
Touch [ ], [ ] or [ ], [
The sub channel of the received radio station is changed.

Forced Analog Mode

Activate the Compulsory Analog Radio mode to receive
only analog radio signals.
Touch [Analog mode].
The [Analog mode] button is highlighted. To cancel
Compulsory Analog Radio mode, touch [Analog mode]
again.
• During Forced Analog mode, only analog broadcasts will be
received even when digital broadcasts become available.
Selecting the Receivable Program
Type (RBDS FM Radio Mode only)
You can select and receive the currently receivable stations
in the Program Type list screen.
1
Touch [PTY Search]
The display shows the Program Type list screen.
2
Select the desired program type in the
Program Type list screen.
Program Type Seek starts and the receivable program
type is received.
If no Program Type station is found, "No program type
available. " will be displayed.
].
33
-EN