HP ProLiant BL35p User Manual page 38

Removing an adapter from the Boot Order list by moving the cursor to the Boot Order field of the
•
adapter, and then pressing Del.
Changes must be saved before exiting the screen.
The Adapter List screen is also the gateway to three other screens:
The Global Properties screen (on page 38)
•
The Adapter Properties screen (on page 39)
•
The Exit Menu screen (on page 44)
•
Global Properties screen
Use the Global Properties screen to change global scope settings. To access the Global Properties screen,
press Alt+N on the Adapter List screen.
Field
Pause when Boot Alert
Displayed
Boot information
display mode
Support interrupt
Restore defaults
To exit the Global Properties screen:
To return to the Adapter List screen, press Alt+N.
•
Description
This option specifies whether the BIOS pauses for user acknowledgment after
displaying an alert message during the boot process. Possible values:
• No (BIOS continues after a message is displayed.)
• Yes (User must press a key for BIOS to continue after a message is displayed.)
This option controls how much information the BIOS displays about adapters and
devices during the boot process. Possible values:
• Display adapters only
Display adapters and all devices
•
Display minimal information
•
Display adapters and installed devices
•
This option enables prevention of a hook on INT40, if required. Possible values:
Hook interrupt (default)
•
Bypass interrupt hook
•
Press Enter while this field is selected to return the values in the others fields on this
screen to their default settings.
Configuration and utilities 38