Advertisement
Quick Links
Advertisement
Related Manuals for Lange Originals HOIST-A-TOP JL CRANK
Summary of Contents for Lange Originals HOIST-A-TOP JL CRANK
- Page 1 HOIST-A-TOP® CRANK Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
- Page 2 ™ Comprehensive Video Guide Instructions Available Thank you for choosing the Lange Originals® Hoist A Top® Crank style. We have added a comprehensive video instructions. This video is available streaming on youtube at the following QR code or hyper-link. To use it on your smart-phone just scan the QR code with your favorite scanner (available on Google play or IOS markets).
- Page 3 Make sure all are �ght and in good working order. • Lange Originals is not responsible for damage or personal injury due to improper installa�on, custom installa�on that doesn't follow the instruc�ons, or neglect to inspect equipment prior to using equipment.
- Page 4 HOIST ®...
- Page 5 4 screws (at least two in each stud) aprox. 50-inches above the floor. Mount your crank unit to the center of the 2x6 using the 2 3-inch lag screws and washers provided. Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
- Page 6 3 inches of center on the 2x6. This will allow the second cable to run along the ceiling without interfering with the other cable. ½ inch le� of center Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
- Page 7 This pulley is ½ inch This pulley can be installed of center. on the wall or ceiling Longer cable side of crank drum) Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
- Page 8 HOIST ® Frame Assembly...
- Page 9 4 Door Setting 2 Door Setting 2 Door Setting 4 Door Setting...
- Page 10 A�ach the cables to the front and rear using the wire thimbles and clamps. Use the farthest back hole for the second li�ing point. Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
- Page 11 Li�ing our op...
-
Page 12: Warranty
About Lange Originals ® Lange is a family started, owned and run business. Our first Hoist-A-Top idea came In 1988 when we struggled to remove a top on a brand new YJ Wrangler. - Page 13 Make the first pulley on center and the second pulley ½ inch le� of center. This will allow the cables to run next to each other without interference. Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
Need help?
Do you have a question about the HOIST-A-TOP JL CRANK and is the answer not in the manual?
Questions and answers