Subscribe to Our Youtube Channel
Related Manuals for Lange Originals HOIST-A-TOP JL CRANK
Summary of Contents for Lange Originals HOIST-A-TOP JL CRANK
- Page 1 HOIST-A-TOP® JL CRANK Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
- Page 2 Crank Comprehensive Video Guide Instructions Available Thank you for choosing the Lange Originals® Hoist A Top® Crank style. We have added a comprehensive video instructions. This video is available streaming on youtube at the following QR code or hyper-link. To use it on your smart-phone just scan the QR code with your favorite scanner (available on Google play or IOS markets).
- Page 3 , elevator bolts, hooks , wire cable, crank hoist, and lifting strap. Make sure all are tight and in good working order. Lange Originals is not responsible for damage or personal injury due to • improper installation, custom installation that doesn't follow the instructions, or neglect to inspect equipment prior to using equipment.
- Page 4 HOIST ® PLEASE READ ALL INSTRUCTION BEFORE INSTALLATION HAT-100 Parts List HAT-101 Parts are listed by part number, description, and quantity. The part number may be referenced in the instructions designated by parenthesis () for your HAT-018 HAT-127 convenience. Parts are updated periodically and may vary in color or shape.
- Page 5 4 screws (at least two in each stud) aprox. 50-inches above the floor. Mount your crank unit to the center of the 2x6 using the 2 3-inch lag screws and washers provided. Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
- Page 6 32 inches of center on the 2x6. This will allow the second cable to run along the ceiling without interfering with the other cable. ½ inch left of center Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
- Page 7 Make the first pulley on center and the second pulley ½ inch left of center. This will allow the cables to run next to each other without interference. Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
- Page 8 This pulley is ½ inch This pulley can be installed left of center. on the wall or ceiling Longer cable (left side of crank drum) Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017...
-
Page 9: Frame Assembly
HOIST ® Frame Assembly A. Locate the Metal T-Frame Bundle. Slide two of the support arms (HAT-101) into the T-shaped bar (HAT-100) moving the spring button to the appropriate holes as shown in Fig. 3 B. Slide the Black Foam Holes (HAT-018) on the arms (HAT-101) to protect your hardtop and freedom top pieces. - Page 10 JL 4 Door Setting JL 2 Door Setting JL 2 Door Setting JL 4 Door Setting Fig. 3 Front settings for JL Fig. 4 Underside placement of the rear arm JL Two Door Setting JL Four Door Setting...
-
Page 11: Installing The Cable
Attach the cables to the front and rear using the wire thimbles and clamps. Use the farthest back hole for the second lifting point. Call toll free 1866 284 7428 langeoriginals.com copyright lange originals 2017... - Page 12 Lifting Your Top 1. Before you lift your top Test all connections make sure hardware is secure in the ceiling and bolts are tight. 2. Back your jeep into the lifting position. Lower the frame on the center of your hardtop without the JL hook. 3.
-
Page 13: Warranty
About Lange Originals ® Lange is a family started, owned and run business. Our first Hoist-A-Top idea came In 1988 when we struggled to remove a top on a brand new YJ Wrangler.
Need help?
Do you have a question about the HOIST-A-TOP JL CRANK and is the answer not in the manual?
Questions and answers