Program 1 (On1 And Off1); Automatic Switching On On1; Automatic Switching Off Off1 - livin flame Skomo User And Installation Instructions Manual

• The time of the automatic switching on and off must be set when the remote
control is Off;
• In the event of an even very short lack of current, you will miss the set time
for the automatic switching on or off. Once the power supply is back, please program
the stove again using the remote control;
• The stove switching on at the scheduled time will keep the same temperature and
power you set before you last switched it off;
• Please consider an interval of min. 20 minutes between the switching off and subse-
quent switching on of the stove. In this way the unit will have time to arrange a com-
plete cooling phase; in the event this minimal interval is not calculated, the stove will
not switch on as scheduled.

Program 1 (ON1 and OFF1)

Automatic switching on ON1

Please join the following procedure to set the time for the
automatic switching on according to the program 1:
Press the key (1). You will see the hours and minutes
and the symbol ON1 blinking on the remote control. Use
the keys (2) and
(intervals of 10 minutes). To scroll the time faster, keep the
keys (2) and (3) pressed.
Confi rm your selection pressing the key
You will now read the set switching on time on the remote
control. Press SEND (4) to transmit your selection to the pcb
of the stove.
The LED chrono-thermostat will light up on the control
board indicating that the programming is on (5).

Automatic switching off OFF1

Press the key (1). You will see the hours and minutes
and the symbol OFF1 blinking on the remote control. Use
the keys (2) and
(intervals of 10 minutes). To scroll the time faster, keep the
keys (2) and (3) pressed.
Confi rm your selection pressing the key
You will now read the set switching off time on the remote
control. Press SEND (4) to transmit your selection to the pcb
of the stove.
The LED chrono-thermostat will light up on the control board
indicating that the programming is on (5).
The LED chronothermostat switches off as soon as the
automatic switching on and off are completed.
The remote control does not show the previously set time
schedule anymore.
(3) to change the wished time
(1) once again.
(3) to change the wished time
(1). once again.
ON 1
2
3
4
1
AL C AL F
5
OFF1
2
3
4
1
ON 1
4
2
3
1
OFF1
4
2
3
1
17