Change The Temperature; Change The Power; Automatic Power Function - livin flame Skomo User And Installation Instructions Manual

Change the temperature

You can change the temperature using the keys
and (2). The temperature range goes from a min. value
of 7°C to a max. value of 40°C.
Once you have chosen the wished temperature, confi rm
your selection pressing the key

Change the power

Use the key (1)to select the power of the stove. The
marks (2) on the display of the remote control indicate the
fi ve possible powers. Press the key SEND (3) to confi rm
your selection. You will see the words on1-on2-on3-on4-
on5 and the room temperature on the control board of the
stove according to the selected power.
You can also select the automatic function. Please refer
to the paragraph on the Automatic Power Function to
understand how the stove works in this mode.

Automatic power function

To enter this function, press the key
the symbol on the display. Press SEND (2) to transmit
your selection. You will read the word "Auto" and the
room temperature on the control board of the stove.
When you select this mode, the pcb will set the working
power automatically according to the difference in degrees
between the set temperature and the temperature identifi ed
by the sensor on the back of the stove.
Press , once more, select the wished power and press
SEND to go back to the usual functioning.
(1)
(3).
Set temperature
1
2
3
2
1
3
(1), until you see
1
2
Set
temperature
1
2
3
2
1
3
1
2
15