Specifications - Makita DFS452 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
2-2. Lock button
3-1. Button
3-2. Mode indicator

SPECIFICATIONS

Capacities
Overall length
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
4-1. Lamp
4-2. Button
5-1. Battery indicator
6-1. Reversing switch lever
7-1. Locator
8-1. Locator
9-1. Hook
Model
Self drilling screw
Drywall screw
No load speed
With short locator
With long locator
Net weight
Rated voltage
noise level determined
) : 72 dB (A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
ENE033-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG905-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
sum)
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Screwdriver
Model No./ Type: DFS452
Conforms to the following European Directives:
2006/42/EC
ENG901-1
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
3
10-1. Locator
11-1. Locator
11-2. Bit
11-3. Magnetic bit holder
12-1. Groove
12-2. Hook
12-3. Screw
DFS452
6 mm
5 mm
-1
0 - 4,000 min
235 mm
251 mm
1.7 kg
D.C. 18 V
ENH101-18