Makita DFS452 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Screwdriver
  5. DFS452
  6. Instruction manual

Makita DFS452 Instruction Manual

Hide thumbs Also See for DFS452:

Advertisement

Table of Contents

See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Screwdriver
DFS452
015159
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita DFS452

Summary of Contents for Makita DFS452

  • Page 1 INSTRUCTION MANUAL Cordless Screwdriver DFS452 015159 IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model DFS452 Self drilling screw 6 mm Capacities Drywall screw 5 mm No load speed 0 - 4,000 min With short locator 235 mm Overall length With long locator 251 mm Net weight 1.7 kg Rated voltage D.C.

  • Page 3: General Power Tool Safety Warnings

    EC Declaration of Conformity refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Makita declares that the following Machine(s): Do not expose power tools to rain or wet Designation of Machine: conditions. Water entering a power tool will Cordless Screwdriver increase the risk of electric shock.

  • Page 4: Cordless Screwdriver Safety Warnings

    Power tool use and care Service 17. Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical power tool will do the job better and safer at the replacement parts.

  • Page 5: Functional Description

    Do not short the battery cartridge: FUNCTIONAL DESCRIPTION Do not touch the terminals with any conductive material. Avoid storing battery cartridge in a CAUTION: container with other metal objects such Always be sure that the tool is switched off and the •...
  • Page 6 Lighting up the lamp 1. Switch trigger 2. Lock button 1. Lamp 2. Button 015162 To start the tool, simply pull the switch trigger. Tool 015163 speed is increased by increasing pressure on the switch To turn on the lamp, slightly pull the switch trigger, trigger.

  • Page 7: Depth Adjustment

    Reversing switch action Battery indicator status CAUTION: Remaining battery capacity Blinking Always check the direction of rotation before • operation. Use the reversing switch only after the tool comes • 50% - 100% to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.

  • Page 8: Operation

    as shown in the figures. Drive a trial screw into your To install the bit, push it firmly into the magnetic bit material or a piece of duplicate material. If the depth is holder. Then install the locator by pushing it firmly back. still not suitable for the screw, continue adjusting until Hook you obtain the proper depth setting.

  • Page 9: Maintenance

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Phillips Insert bits • Magnetic bit holder • Makita genuine battery and charger •...
  • Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885373-226...

Table of Contents