Pan And Tilt Camera - Old Camera Interface - FLIR RAYMARINE A65 Operation Instructions Manual

19.9 Pan and tilt camera — old camera interface
The thermal camera application menu options for a pan and tilt thermal camera with the old camera
interface are shown below.
Activate Camera
Pause Image
Camera Home
Image Options
Adjust Contrast
Standby
Camera Set-up
Camera Set-up menu
Set Home Position
Camera menu
Align Camera
Note: The thermal camera menu options available are dependant on the software version of your
multifunction display and thermal camera. If options are different than listed above please refer to the
manual that accompanied your thermal camera and / or the installation and operations handbook which
accompanied your multifunction display.
314
Brings the thermal camera out of standby mode. (only available when camera is in
standby.)
• On
• Off (default)
Select to return the camera to its home position.
Select to display the Image Options sub-menu.
• Color
– Red
– Greyscale
– Glowbow
– Rainbow
– Fusion
• Scene
– Night Running
– Night Docking
– Day Running
– Man Overboard
• Thermal / Visible
• Reverse video
• Rear View
• Surveillance
Select to display the Adjust Contrast sub-menu.
• Contrast
• Brightness
• Color
Select to place the camera in to standby mode. (only available when camera is
activated.)
Select to display the Camera Set-up menu.
• Set Home Position
• Camera menu — (Onscreen display (OSD) menu)
• Align Camera
Sets the camera's current position as the Camera Home
position.
Provides access to the camera's onscreen display (OSD) menu
options.
Enables changes to camera's horizontal alignment.