Attaching The Wrist Strap; Device Care; Cleaning The Device; Data Management - Garmin GPSMAP 66s Owner's Manual

Attaching the Wrist Strap

1 Insert the loop of the wrist strap through the slot in the device.
2 Thread the other end of the strap through the loop, and pull it tight.

Device Care

NOTICE
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
The device is water resistant to IEC Standard 60529 IPX7. It can withstand accidental immersion in 1 meter of
water for 30 minutes. Prolonged submersion can cause damage to the device. After submersion, be certain to
wipe dry and air dry the device before using or charging.
Thoroughly rinse the device with fresh water after exposure to chlorinated or salt water environments.

Cleaning the Device

1 Wipe the device using a cloth dampened with a mild detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.

Data Management

NOTE: The device is not compatible with Windows ® 95, 98, Me, Windows NT ® , and Mac ® OS 10.3 and earlier.

File Types

The handheld device supports these file types:
• Files from Garmin Explore.
• GPX route, track, and waypoint files.
• GPX geocache files (Downloading Geocaches Using a Computer, page 21).
• JPEG photo files.
• GPI custom POI files from the Garmin POI Loader. Go to www.garmin.com/products/poiloader.
• FIT files for exporting to Garmin Connect.
Device Information 35