Place J-tube assembly on top of the installed bows. Be sure the J-Tube is oriented with
hook towards front and outside of vehicle.
Leave one square slot open at the rear of the tube.
Mount the tube assembly to the bows using 5/16" x 2" carriage bolts, 5/16" flat washers
and 5/16" lock nuts.
Step 3 – Install Hanger Bracket
Mount the angle bracket to the
underside of the tube assembly in
the orientation shown using
5/16" x 2" carriage bolts, 5/16" flat
washers and 5/16" lock nuts. Be sure
to have the angle bracket offset to
the center of the vehicle.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
REAR
Instructions – 4081L
FRONT
Page 5