Step 4 – Attach Clamp Tube and L-bracket
Place the plastic bushings on the rotating clamp in the orientation shown. Be sure to have
the long flange of the L bracket to the center of the vehicle.
Place the long angle bracket on top of the bows as shown. Have the bend offset to the
center of the vehicle.
Insert the bushings into the long angle bracket and the angle bracket. Be sure to install the
bushings in an orientation so they CANNOT fall out.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Instructions – 4081L
Page 6