Using 5/16" x 2" carriage bolts, 5/16" flat washers and 5/16" lock nuts, fasten the side tube
assembly to both pans. Be sure to leave one square slot open at the rear of the side tube.
Snug tighten, but allow movement.
Step 4 – Install Hanger Bracket
Using 5/16" x 2" carriage bolts, 5/16" flat washers and 5/16" lock nuts, bolt the angle bracket to the underside of the side
tube as shown. Be sure the downward flanges is towards center of vehicle and downwards.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
REAR
Instructions – 4A82L
FRONT
Page 8