Step 5 - Mount Handle - Kargo Master 4081L Installation Manual

Step 5 – Mount Handle
 Bolt the handle to the rotating clamp in the order shown using a 3/8" x 3" hex head, a
3/8" flat washer, 3/8" nylon washer, 3/8" contour washer and a 3/8" lock nut. The nylon
washer goes in between the rotating clamp and the handle. The contour washer goes
against the handle.
 DO NOT overtighten. Handle should rotate freely.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
NYLON WASHER
Instructions – 4081L
Page 8