Step 1 ─ Remove Ladder End Stops; Step 2 - Install Side Tube - Kargo Master 4081L Installation Manual

Step 1 ─ Remove Ladder End Stops
 If haven't already done so, remove ladder stops from the opposite end of both bows
where the existing ladder rack is installed.
Step 2 – Install Side Tube
 Insert the J-tube into the tube as shown.
 Place sealant along
the swage joint.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Instructions – 4081L
Page 4