Seal Adjustment Hollandia 700 - 20 Series - Webasto HOLLANDIA 700 - 40 Series Service Manual

3. REPAIRS
3.10

Seal adjustment HOLLANDIA 700 - 20 series

The proper positioning of the steel panel should locate the seal firmly in touch with either the EPDM trim ring
or flanged metal circumference of the sunroof opening. If the panel fits properly yet there remains a gap
between seal and trim ring it can be corrected as follows:
1. Readjust panel according to instructions in the installation manual chapter 5.3.
2. With a grease pencil mark the boundaries of insufficient contact on the panel.
3. Remove panel.
4. In the areas marked a spacer will be inserted between panel retaining channel and rubber seal.
(Figure 3.12.1)
5. Remount panel and adjust according to the installation manual chapter 5.3.
Figure 3.12.1
29