Download Print this page

Yale EMS 10-16 Operation And Parts Manual page 2

Advertisement

ENGLISH Pay attention to the following matters before operating this stacker:
1. EMS10 manual stacker can only be operated indoor on even and solid ground and it is strictly
prohibited to operate the stacker in a corrosive environment with acid and alkali.
2.Please read this manual carefully and understand the performance of the stacker before
operating; Inspection of the stacker should be conducted carefully every time before operation
to ensure that the stacker is in normal condition. It is strictly prohibited to operate a faulty
stacker.
3.It is strictly prohibited to overload the stacker. The load capacity and the load center should
meet the requirements in the parameter table of this manual.
4.When stacker is used for piling, the gravity center of the goods must be within the two forks
and it is strictly prohibited to pile loose goods.
5.When it is required to transport the goods for a comparatively long distance, the height of
the forks from the ground should not exceed 0.5m.
6.When piling goods, it is strictly prohibited for people to stand under the forks or around the
stacker.
7.It is strictly prohibited to stand on the forks for operation.
8.When the goods are on high level, the goods should be pushed forward or pulled backward
slowly and no cornering is allowed in such a case.
1. General specifications
Load capacity Q (kg)
Load center distance c (mm)
Service weight (kg)
Height, mast lowered h1 (mm)
Max. lift height h3 (mm)
Lowered fork height h13 (mm)
Overall length I1 (mm)
Overall width b1 (mm)
Fork dimensions s/e/l (mm)
Distance between fork-arms b5
Turning radius Wa (mm)
Lift speed (mm/s)
1000
600
230
2080
1600
90
1655
860
61x170x1100
550
1380
25

Advertisement

loading

This manual is also suitable for:

Sdj 1000