Safety And General Information; Product Description - Polaris 2830426 Operating Instructions & Parts Manual

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read, under-
stand, and follow the information provided with and on
this attachment. The owner and operator of this equip-
ment shall have an understanding of this product and it's
safe operating procedures before attempting to use. The
owner and operator shall be aware that use and repair
of this product may require special skills and knowledge.
Instructions and safety information shall be conveyed in
the operator's native language before use of this lift is
authorized. If any doubt exists as to the safe and proper
use of this lift, remove from service immediately. Inspect
before each use. Do not use if broken, bent, cracked or
damaged parts are noted. Any lift that appears damaged
in any way, or operates abnormally shall be removed
from service immediately. If the product has been or is
suspected to have been subjected to a shock load (a
load dropped suddenly, unexpectedly upon it), imme-
diately discontinue use until it has been examined by
a Polaris authorized service center. It is recommended
that an annual inspection be done by qualified personnel.
Labels and Operator's Manuals are available from the
manufacturer (see Replacement Parts, pg. 6).
Hook Height
Adjustment
Threaded
Rod/Hook
Assemby
Adjustment Knob
Figure 1 - Model 2830426 Nomenclature

PRODUCT DESCRIPTION

The Polaris Snowmobile Attachment is specifically de-
signed to lift, and support, up to rated capacity loads
consisting of a single snowmobile whose frame is com-
patible with the lifting platform. Incompatibility is evident
when the loaded vehicle wobbles, feels unstable, and/
or does not sit securely on the lift platform. This product
is NOT suitable for lifting, leveling and/or positioning
automobiles, trucks, SUV's or conveyances other than
those specifically listed and approved above. This prod-
uct is NOT suitable for lifting, leveling and/or positioning
houses, construction trailers and dwellings in general.
This product does not contain independent lifting de-
vices, but is designed to be permanently assembled. The
Hydraulic Unit is not to be used independently of the lift.
2
Lift Platform
Saddle Stop Plate