Table of Contents
Advertisement
E. Using Burn Rate Air Control & ACC System
CAUTION
Injury Risk.
•
Gloves recommended
1. Start up and Reloading Fuel
Open both Burn Rate Air Control and ACC systems
fully. To do this with the Burn Rate Air Controls push
spring handle up to high. For the ACC timer system
push knob towards back of appliance until the knob is
located under the high position (Figure 11.1).
Burn Rate
Air Control
Automatic
Combustion
Control (ACC)
Figure 11.1
2. Maximize Heat with The ACC System
To maximize heat output with the ACC timer System
or also known as high burn push the ACC Air Control
lever towards the back of the appliance and leave.
This combined with having the main burn rate control
lever pushed up will deliver the most amount of air
needed to achieve the highest amount of heat output
(Figure 11.1).
11
HIGH
MED
LOW
Low
High
setting
setting
3. Manual Timer Over-Ride
If you need to shut the ACC system off before it goes
through the cycle of shutting itself off; 25 minutes,
reach towards the back of the appliance on the
right side and pull the lever towards the front of the
appliance (Figure 11.2).
HIGH
MED
LOW
Pull Forward
to Shut Down
Figure 11.2
7037-804D
Manual
Timer (ACC)
Shut Down
07/21
Advertisement
Table of Contents
