Appliance Description; Operation - Beem Power Station Pro4 Operating Instructions Manual

Steam iron station
Table of Contents

Advertisement

Available languages

Available languages

Power Station Pro4

Appliance description

(refer to the left fold-out page for illustration)
1
Water tank
2
Carrying handle
3
Ironing sole
4
Temperature selection button
5
Steam button
6
Steam button lock mechanism
7
Steam button
8
Power indicator
9
Temperature display 1
10
Temperature display 2
11
Temperature display 3
12
Temperature display 4
13
Cable/steam hose
14
Mains cable
15
Carrying handle lock release
16
Water tank lock release
17
Filter
18
Water tank light
19
User manual (not illustrated)
Special functions of the appliance
The appliance is equipped with an
electronic temperature setting that
maintains or quickly heats up to the
selected temperature.
The appliance is equipped with an
automatic switch-off that switches off
after 20 minutes when the steam iro-
ning function is not in use.
The
anti-liming system filter reduces
calcium deposits within the appliance
if normal tap water is used instead of
distilled water (see section Filling the
water tank).
20

Operation

filling the water tank
Press the button upwards to release
the lock on the water tank and pull the
tank to the front and out of the appli-
ance (see figure A1).
Remove the calcium filter by pulling it
upwards out of the water filling ope-
ning (see figure A2).
Fill the water tank up to the MAX mark
with approx. 1 litre of water (see figure
A3).
Insert the calcium filter back into the
water tank (see figure C3).
Push the water tank back into the
appliance until it audibly locks in (see
figure A5).
NOTE
During ironing, the pumping noise
of the appliance becomes very loud
if the water level is low or the water
tank is empty. In this case, refill the
the tank with water immediately.
It is only possible to remove the tank
when the appliance is switched on.
Quickly fill the tank with water and
insert it again.
The water tank light extinguishes if
you remove the tank and lights up
again after you have reinserted it.
The light of the water tank only lights
up when the tank is inserted and
locked in properly.
BEEM - Elements of Lifestyle
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

D3.001

Table of Contents