Table of Contents
Advertisement
Washing Results are not satisfactory
Problem
The dishes are not
clean.
●
Whitish streaks,
s t a i n s o r b l
u i s h
●
layer s on glasses
●
and dishes.
Possible caus
e
●
Filters are clogged.
F i l te r s a r e n o t c o r r e c tl y
assembled and installed.
Spray arms are clogged.
P r o g r a m m e w a s n o t
applicable for the type of load
and food remnants.
Incorrect position of the items
in the baskets. Water could
not wash all items.
Spray arms could not turn
freely.
No detergent or insufficient
quantity of detergent in the
detergent dispenser.
T h e w a s h c y c l e w a s
interrupted by a long break.
Released quantity of rinse aid
is too much.
Quantity of detergent was too
much.
Multitab detergent tablets
used with a short programme
might not fully dissolve.
Troubleshooting
Possible solution
Clean the filters.
Make sure that the filters
are correctly assembled and
installed.
R e m o v e r e m a i n i n g f o o d
remnants with a thin pointed
object.
M a k e s u r e t h a t t h e
programme is applicable for
the type of load and food
remnants.
Make sure that the position
of the items in the baskets is
correct and that the water can
easily wash all items.
Make sure that the position
of the items in the baskets is
correct and does not cause
the blockage of the spray
arms.
Make sure that you add the
correct quantity detergent in
the dispenser before you start
a programme.
●
Do not open the door or cut
power supply during the wash
cycle.
D e c r e a s e t h e r e l e a s e d
quantity of rinse aid.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
Select a longer programme
when using Multitab detergent
tablets.
25
Advertisement
Table of Contents
