Hoover HDPH 2D945W-86 User Manual page 24

Care and cleaning
Cleaning the centre spray arm
To remove the centre spray arm, carefully unscrew its locking nut.
Rinse the spray arm thoroughly under running water, then refit.
IMPORTANT !
Make sure you twist the locking nut on the centre spray arm firmly back on the
water supply tube.Check that the centre spray arm is firmly locked in place and
rotates freely.
Cleaning the lower spray arm
To remove th e lower spray arm, simply lift the spray arm off its mounting.
●
Rinse the spray arm thoroughly under running water, then refit it on its mounting.
●
22
Water supply tube
Locking nut
Centre spray arm
Low er spray arm
●