Table of Contents
Advertisement
Many occuring problems could be solved by yourself without specific expertise. In
case of a problem please check all shown possibilities and follow below instructions
before you contact an after sales service.
CAUTION
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
Electrical equi
pment should be serviced only by qualified electrical experts,
because improper repairs can cause con
●
●
The appliance does not start, or it stops during operation or Indicator is lighted
Problem
The programme
does not start.
Display shows
Rinse Aid
●
Display shows
Salt Aid
Possible cause
Appliance door is open.
Delay start is set.
Mains plug is not connected
in the mains socket.
Fuse in the house circuit is
damaged.
Rinse aid dispenser is empty. Refill Rinse aid until full.
Refill of rinse aid was not
confirmed.
Softener salt is empty.
Refill of salt was not
confirmed.
siderable consequential damages.
Possible solution
Close the appliance door.
Refer to displayed time.
Connect the mains plug.
Replace the fuse.
Press
after each refill.
Fill the tank up with specific
salt until full.
Press
after each refill.
Troubleshooting
button for 3 sec
button for 3 sec
23
Advertisement
Table of Contents
