Advertisement
Requirements
Procedure
Requirements
10BaseT or 100BaseT network.
TCP/IP protocol.
ISDN phone line, with S/T interface.
Procedure
1. Choose an Installation Site
Select a suitable location which is close to:
ISDN Phone jack.
Power outlets.
10BaseT or 100BaseT hub.
2. Connect ISDN Internet Router to LAN
Use standard UTP network cable, with RJ45 connectors, to connect New Tintoretto LAN+ to a 10BaseT
or 100BaseT hub. The LAN connection on the New Tintoretto LAN+ will auto-detect the network speed
3. LAN Installation
Advertisement
