Table of Contents
Advertisement
VEHICLE MAINTENANCE
Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak performance. Preventative maintenance
will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain your vehicle.
Replace any
noticeable bent or
broken parts
Check the wheel nuts
for tightness
If applicable, check
the slipper clutch for
proper operation
Check for wear on
Check driveshaft
the ball joints in
set screws and
the steering and
apply thread
suspension links
locking compound if
(replace if necessary)
necessary
Ensure the wheel
Keep the chassis free
beads are still firmly
of dirt and debris
bonded around the
entire circumference
of the rim
Check the receiver
Check the steering
antenna for damage
operation for any
Inspect shock
absorbers for smooth
dampened operation
Check for loose
screws on the chassis,
especially the knuckle,
C-hub and axle lockout
screws
Inspect the spur
and pinion gears for
binding
damage
9
EN
Check for any loose
connections or frayed
wiring
Check the driveline
for smooth, bind free
operation
Replace the
transmitter batteries
when indicated by
the transmitter, as
described in the
Transmitter Functions
section
Advertisement
Table of Contents
