Cochlear CP900 Series Quick Manual

Cochlear Wireless Phone Clip
™
Quick Guide for CP900 Series users
Features of your Phone Clip
Enjoy hands-free calling direct to your CP900 Series Sound
Processor.
Hear your Bluetooth®-enabled navigation system.
Stream music from a Bluetooth-enabled device.
The Phone Clip can be easily attached to clothing. The built-in
microphone will pick up and transmit your voice, even if your phone
is several metres away.
Product overview
Microphone
inlet
Power
switch
ON
Call pick-up/
hang-up button
Volume
control
(Not used with
CP900 series)
Micro-USB connector
for charging
Getting Started
Charging the battery
Plug one end of the included micro-USB charging cable into the
Phone Clip and the other into a computer, or into a power outlet via
the supplied adapter.
When the red LED indicator on top of the Phone Clip turns green
with a red blink every 2 seconds charging is complete.
Before you use your Phone Clip you should allow it to charge for
at least 3 hours, even if the indicator light shows a full charge. The
battery cannot be overcharged.
Note: The Phone Clip provides 6 hours of talk time or 80 hours of
standby time from a full charge.
1
10-30cm between mouth
and Phone Clip