Cochlear CP900 Series Quick Manual

Cochlear Wireless TV Streamer
™
Quick Guide for CP900 Series users
Features of your TV Streamer
Enjoy high quality streamed audio direct to your CP900 Series
Sound Processor from your TV, stereo, computer or other
similar device.
Supports both analog and digital input.
Reconnects automatically if you leave the room and return
within 5 minutes.
Install it and forget it - just click a button to watch TV.
The TV Streamer plugs into an ordinary wall socket and plugs
directly into your audio device. The TV Streamer will stream
stereo sound through your sound processors from up to
7 metres away.
Product overview
Pairing
button
Coaxial audio input
Micro-USB power socket
Power
light
UP DOWN
Mono/stereo
Optical (Toslink)
Mini-jack audio input
Activity
light
Getting Started
Volume
Adjusting the volume
control
How to:
To change the volume, use the volume control on the TV Streamer.
Make sure that your sound processors are comfortably adjusted
before you change the settings with the volume control. In most
cases you only need to make this adjustment once, since the
TV Streamer will store the most recently set volume level.
switch
Mono/stereo control
audio input
How to:
The two-position Mono/Stereo switch may be used to set Stereo or
Mono audio streaming.
For bilateral fittings, the switch should preferably be set to the Stereo
position.
For unilateral fitting it should be set to the Mono position.
1
Up to
7 metres
Sound Processor