Bose Sleepbuds II Manual page 2

Please read and keep all safety, security, and use instructions.
Bose Corporation hereby declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements.
The complete declaration of conformity can be found at: www.Bose.com/compliance
Important Safety Instructions
1. To avoid accidental ingestion, keep the Sleepbuds™ away from children and pets. The Sleepbuds™ contain a
nickel-metal hydride (NiHM) battery, and may be hazardous if swallowed. If ingested, seek immediate medical
attention. When not in use, store the Sleepbuds™ in the charging case with the charging lid closed, and keep out
of the reach of children and pets.
2. Do NOT allow children to use the Sleepbuds™.
3. Clean the Sleepbuds™ and charging case only with a dry cloth. For additional cleaning instructions,
see page 27.
4. Only use attachments/accessories specified by the manufacturer.
WARNING/CAUTION
• When using this product, basic precautions should always be followed, including the following:
– Read all the instructions before using the charging case.
– To reduce the risk of injury, close supervision is necessary when the charging case is used near children.
– Do not expose charging case to water, rain, liquids or snow.
– Do not use the charging case in excess of its output rating. Overload outputs above rating may result in a risk of
fire or injury to persons.
– Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.
– Do not disassemble the charging case. Take it to a qualified service person when service or repair is required.
Incorrect re-assembly may result in risk of fire or injury to persons.
– Do not open, crush or expose a charging case to fire or excessive temperature. Exposure to fire or temperature
above 212° F, 100° C may cause explosion.
– Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that
the safety of the product is maintained.
• The Sleepbuds™ are designed to mask sounds. Do NOT use your Sleepbuds™ in a way that may interfere with
sounds you need to hear for your safety or the safety of others.
• Use this product only with an agency-approved power supply that meets local regulatory requirements (e.g., UL,
CSA, VDE, CCC).
• Remove Sleepbuds™ immediately if you experience a warming sensation or loss of audio.
• Do NOT submerge the Sleepbuds™ in water. Do NOT expose the Sleepbuds™ to moving water (e.g., from a faucet,
etc.). Do NOT wear the Sleepbuds™ while showering or bathing, or when participating in water sports, e.g.,
swimming, waterskiing, surfing, etc.
I M P ORTA N T SA F ET Y I N STR UCT IO NS
|
2 E N G