Operation Procedure; Operation By Operation Panel; On/Off Automatic Operation Changing The Fan Operation Mode - Toyotomi ETK-S50 Instruction Manual

ETK-S50_US_ES.qxd 14.9.9 9:13 ページ 10

OPERATION PROCEDURE

OPERATION BY OPERATION PANEL

AIR QUALITY
BED
SMALL
DINING
LIVING
DUST ODOR ROOM
SMOKE
Odor Lamp
Dust Lamp
1
1

ON/OFF AUTOMATIC OPERATION CHANGING THE FAN OPERATION MODE

1 Press the operation button
● The Air Purifier Operation starts.
● Each press of the operation button switches the operation mode in the following order. Select desired
operation mode.
Ion Ion Ion
+ + +
Auto Quiet Standard
● The Auto lamp indicates automatic operation.
● The Fan Speed lamp indicates the changing of the fan speed.
★ Timer operation, Smoking operation and Pollen operation cannot be made by operation
panel of the Main Unit. Use Remote Control.
10
SMOKE
4
POLLEN
2
1 FILTER
(H)
Fan Speed Lamps
Auto
Timer Lamp Quiet
Room Mode Lamp Standard
High
Rapid
Room Mode Button
Operation Button
Ion Ion
+ + Stop
High Rapid
NOTE
OPERATION PROCEDURE
AUTOMATIC OPERATION
During Automatic operation the AUTO Lamp ( Green ) lights together with a red lamp indicating the fan
●
speed.
■
Lighting of the air quality lamp in the automatic operation mode.
● The air quality lamp will not light for three minutes after plugging in the power cord. (The three
minutes are required for preliminary operation of the sensor.) Automatic operation means standard
operation when the air quality is not lighting up.
●
When air is dirty, the air quality lamp turns Red.
●
The operation mode will change according to how many times the air quality lamp turns Red.
■
The operation mode will be switched according to how many times the red lamp has been lit
( the more red lamps, the dirtier ) .
Air Quality
Ion Ion
operation mode +
Auto Quiet
Ion Ion Ion
+ + + +
Standard High Rapid
11