Automatic Operation - Toyotomi ETK-S50 Operating Manual

D
OPERATION BY OPERATION PANEL
Remote Control Receptor
AIR QUALITY
BED
SMALL
DINING
LIVING
DUST ODOR ROOM
SMOKE
Dust Odor Room
Lamp Lamp Mode
Lamp
1 Insert the plug into the socket.
2 Press the control button  to switch the device on. The
speed light will switch on. In the
selects the fan speed required to filter the air in the room.
3 Pressing the control button  again will change the mode as follows:
Ions Ions
+ +
AUTO Silence
The appropriate fan speed light
!
attention!
The Timer , Smoke
the remote control.

autoMatiC operation

• During Automatic operation the AUTO Lamp (Green) lights together with a red
lamp indicating the fan speed.
lighting of the air quality lamp in the automatic operation mode.
• The air quality lamp will not light for three minutes after plugging in the power
cord. (The three minutes are required for preliminary operation of the sensor.)
Automatic operation means standard operation when the air quality is not
lighting up.
• When air is dirty, the air quality lamp turns Red.
• The operation mode will change according to how many times the air quality
lamp turns Red.
the operation mode will be switched according to how many times the red lamp
has been lit (the more red lamps, the dirtier).
4
6
SMOKE
4
POLLEN
2
1
FILTER
(H)
Timer
Lamp
mode, the air purifier automatically
Ions Ions
+
Normal High
, , or
and Pollen
Fan Speed
Lamps
Auto
Quiet
Standard
High
Rapid
light and a fan
Ions
+ +
Fast
will switch on.
modes can only be operated with
1
Room Mode Button
Stop
Control button