Toyotomi ETK-S50 Instruction Manual page 5

ETK-S50_US_ES.qxd 14.9.9 9:13 ページ 6
NAME OF COMPONENT PARTS
DISPLAY / CONTROL PANEL
Press the button to start operation. The air volume changes with every push.
Ion Ion
+
Auto Quiet
REMOVE THE FRONT PANEL
Odor Sensor
RESET BUTTON
Press this button after the Semi HEPA filter is
replaced. When the filter lamp lights, replace the
Semi HEPA filter. Please replace the filter every
five years or so.
6
Room Mode Button
Once press this button more than 1 sec.,
the Room Mode will be on and the Room
Mode Lamp will flash. To switch each mode,
press this button again during flashing.
OPERATION BUTTON
Ion Ion Ion
+ + + +
Standard High Rapid
Room Mode Lamp
Displays the present setting.
NAME OF COMPONENT PARTS
OPERATION PANEL
AIR QUALITY
DUST
SMOKE
Dust
Lamp
REMOTE CONTROL
Stop
TRANSMITTING PART OF
REMOTE CONTROL
Sends operation signals to the Remote
Control receptor on the main unit. The
effective Remote Control is within about
7 meters directly from the front.
ON / OFF BUTTON
Press the button to start operation and
push the same button again to stop
operation. The operation starts with
automatic operation mode and Auto
lamp ( Green ) lights.
FAN SPEED BUTTON
Press the button
Ion Ion
+ +
Auto Quiet
Ion
+
High
The operation mode changes as shown
above; the automatic
indicator lamp and fan-speed indicator
lamp will light according to changes in
operation and fan speed.
Remote Control Receptor
SMOKE
BED
4
SMALL POLLEN
2
DINING
1
LIVING FILTER
(H)
ODOR ROOM
Odor Room Timer
Lamp Mode Lamp
Lamp
Once press this button, the
Room Mode will be on.
The Timer Button is used to
set and erase the time-off for
operation. The Timer Lamp
( Green ) lights up.
When
Ion
pressed, the Smoking operation
+
Standar
starts and the Smoking lamp
d
( Green ) lights up.
Ion
+
Rapid
operation When Pollen button is pressed,
the Pollen operation starts and
the Pollen Lamp ( Green ) lights
up.
Fan Speed
Lamps
Auto
Quiet
Standard
High
Rapid
Room Mode Button
TIMER BUTTON
SMOKING BUTTON
Smoking button is
POLLEN BUTTON
7