Coway AP-1511FHE User Manual page 17

 Anion Electrode Part Cleaning (Every 2months)
Get rid of dirties on the charged body and the electric discharge pin with soft brush of cotton
swab after opening a ventilation grill with a screw driver. (Be careful not to drop the cotton swab
into the unit.)
 RBD Plasma Antibacterial Catalysis Filter
1. Open the front cover by pulling out the end part above the
air inlet.
2. Take out the plasma antibacterial
catalysis filter, and then divide the
filter into two pieces by pushing both
hooks of the filter.
3. When you clean the RBD plasma filter, please wipe the
tungsten wire, the dirties on the electrode with a wet cloth
and then make it dry with a dry cloth.
 Never splash the water in the unit or soak it in water.
 Be careful about the down of the tungsten wire.
 Please completely dry, in case that the water gets into the
inside of the filter. (If the inside is taken by water, please use
after dry over 12 hours.)
▶ ▶
▶
16