Touch Board - Sony HT-MT300 Service Manual

2-7.

TOUCH BOARD

Note 1: Lay a soft piece of cloth under the unit
to avoid damaging the top cabinet.
3 Gradually peel off the TOUCH board with
a flathead screwdriver, etc.
Note 3: The TOUCH board is affixed to the top cabinet
with a strong adhesive sheet.
When removing the TOUCH board, take care
so that you do not damage it.
TOUCH board
flathead screwdriver, etc.
left side
1 Draw the TOUCH board cable
out of two grooves.
top cabinet
adhesive (VG1)
TOUCH board
LED_CHUKEI board
TOUCH
board
cable
front side
rear side
top side
6 TOUCH board
Note 2: When installing the TOUCH board,
align the two bosses and two holes.
guide line
(starting point)
HT-MT300/MT301
CN4001
two grooves TOUCH board
2 TOUCH board cable
connector (CN4001)
top cabinet block
right side
4 Draw the TOUCH board
block out of the two ribs
in top cabinet block.
hole
hole
5 adhesive
rib
rib
boss
boss
(VG1)
13