Installing Software Hasp; Activating A Trial Version - SafeNet HASP HL Time Installation And Configuration Manual

INSTALLING LOCAL HASP
9

3.2 Installing Software HASP

3.2.1 Activating a Trial Version

Trial versions are available only for the products intended for local use (on a single PC).
To get a trial version, contact STC sales team. A product lead will then provide you with the relevant
installation package and an .exe file containing the HASP SL Trial key.
You can use a trial key for 90 days since the software has been run for the first time.
Install the STC licensed software by unpacking the installation package and the setup.exe file it contains, and
then following the installation wizard instructions.
Once the software has been installed, make sure the HASP Driver is working by checking whether the
Sentinel License Manager
To activate a trial software version, folow the instructions on installing a trial key. These instructions may
be supplied by STC product lead or technical support. As a rule, a trial key is installed through one of the
methods below.
3.2.1.1 Using the Command Prompt
Run the Command Prompt as administrator by clicking Start > All Programs > Accessories, then right-
clicking Command Prompt and selecting Run as administrator. Alternatively, you can just type cmd into
the search box after opening the Start menu.
Open the folder housing the .exe file with the trial key and use your mouse to drag and drop it into the
command prompt. Then, hit spacebar and type –i (Fig. 1). Press Enter.
Wait till Windows runs the command, then check whether the
software by clicking on its shortcut on your desktop or via the Start menu.
3.2.1.2 Using the .bat File
Double-click the .bat file intended for the trial key installation. The file will run the key installation command
(the key itself is an .exe file).
service is running.
Figure 1: Activating a Trial Version
Installation and Configuration Guide
HASP key is active. Finally, run the installed STC
HASP Keys