SafeNet HASP HL Time Installation And Configuration Manual page 16

INSTALLING LOCAL HASP
16
3.2.3.1 Generating C2V File
Run the RUS Branding utility (RUS_Branding_STC.exe file) on the computer you want to install the software
key to.
Using the utility, generate a .c2v file containing a snapshot of the computer configuration. This will link the
key with the computer.
On the Collect Status Information tab, select Installation of new protection key (Fig. 11).
Then click Collect Information and select a path to save the C2V file. Finally, close the RUS Branding
application.
3.2.3.2 Generating V2C File
If you are unable to access the Customer Portal for any reason, send the generated c2v file to STC
Technical Support (for contact details, see
Our technical support engineer will send you a .v2c file containing the software key for the
product in question.
file) using the RUS Branding utility.
To access the Customer Portal, you must open TCP ports 80 and 443 on your computer.
Move the c2v file you have created to a computer which has internet connection.
Run your browser (for best performance, it is recommended to use Internet Explorer) as administrator (Fig.
12). Install the latest version of Java, if not yet installed, by following the instructions provided on Java.com.
Figure 11: Collect Status Information tab
Technical
Apply the .v2c file you got
Installation and Configuration Guide
Support).
on the computer you have taken snapshot of (c2v
HASP Keys