SafeNet HASP HL Time Installation And Configuration Manual page 24

INSTALLING LOCAL HASP HASP Keys
24
Installation and Configuration Guide
Figure 23: Key Status Retrieved from Protection Key Successfully message
Finally, send an email with the c2v file attached to Speech Technology Center Support (for contact details,
see Technical Support).
3.2.4.2 Applying V2C File
To update a key, you will need a .v2c file which contains licenses to use the product in question. You will be
emailed this file by our technical support engineer.
To update the key, run the RUS Branding utility on the computer where the key is installed. On the Apply
License File tab, click (Fig. 20) and select the V2C file.
Figure 24: Apply License File tab
Click Apply update to finalize the key update and close the RUS Branding application.