Whirlpool WEG745H0F Owner's Manual page 15

Complete Connection
1. Check that the gas pressure regulator shut-off valve is in the
"on" position.
A. Gas pressure regulator shut-off valve shown in the
"on" position
2. Open the manual shut-off valve in the gas supply line. The
valve is open when the handle is parallel to the gas pipe.
A. Closed valve
B. Open valve
3. Test all connections by brushing on an approved noncorrosive
leak-detection solution. If bubbles appear, a leak is indicated.
Correct any leak found.
4. Remove cooktop burner caps and bases from package
containing parts. Place the burner bases as indicated by the
following illustration for your model:
For models WEG745H0F and MGS8800F:
A. Small (Auxiliary)
B. Large (Ultra Rapid)
C. Oval (OV)
D. Medium (Semi Rapid)
E. Large (Ultra Rapid)
For model KSGG700E:
A. Small (Auxiliary)
B. X-Large (Stack)
C. Medium (Semi Rapid)
For model KSGB900E:
A. Small (Auxiliary)
B. X-Large (Stack)
C. Oval (OV)
NOTE: Each round burner base is marked with one of the
following: AUX, SR, UR, ST.
5. Align the gas tube opening in the burner base with the orifice
holder on the cooktop and the igniter electrode with the notch
in the burner base.
A. Burner cap
B. Gas tube opening
C. Burner base
D. Medium (Semi Rapid)
E. Large (Ultra Rapid)
D. Medium (Semi Rapid)
E. Large (Ultra Rapid)
D. Orifice holder
E. Igniter electrode
15