Broth; Curry - John Lewis Pressure Cooker Instruction Manual

P10 Broth Broth mode is a program for making broths. In this setting, the pressure
level and the cooking time are preset, so they cannot be changed.
!
NOTE: make sure that the lid is in the closed position and the exhaust
valve is in the sealed position.
Function: broth
Time: 15 mins
Pressure: yes
Temp: about 116C
Keep warm: yes
Normal mode
1 When the cooker is in Standby mode, press the Menu button. The
display will flash "P01".
2 Press the + button to reach P10.
3 If no other buttons are pressed, the cooker will begin to cook in ten
seconds in this setting and display P10 without flashing.
4 You will hear three beeps, and the cooker will be set in this program.
5 Once the required pressure and temperature are reached, the cooker
will display the cooking time and will start a countdown.
- Once the cooking is finished, the cooker will beep, enter the Keep
W- If left unattended for an hour, the display will show 1H (one
hour) and so on.
- To cancel the setting, press the Keep Warm/Power button.
Delay Timer mode
1 In Standby mode, press the Menu button. The display will flash "P01".
2 Press the + button to reach P10.
3 Press the Delay Timer button and set the delay time. See the Delay
Timer section in Control Panel Functions for details.
!
TIP: refer to our recipes in this manual to try a delicious broth recipe.
28
P11 Curry Curry mode allows you to cook various curries. In this setting, the pres-
sure level and the cooking time are preset, so they cannot be changed.
!
NOTE: make sure that the lid is in the closed position and the exhaust
valve is in the sealed position.
Function: curry
Time: 20 mins
Pressure: yes
Temp: about 116C
Keep warm: yes
Normal mode
•
The display will flash "P01".
•
•
in ten seconds in this setting and display P11 without flashing.
•
program.
•
cooker will display the cooking time and will start a countdown.
•
Keep Warm mode, and display 0H (zero hours).
•
hour) and so on.
•
Delay Timer mode
•
"P01".
•
•
Delay Timer section in Control Panel Functions for details.
When the cooker is in Standby mode, press the Menu button.
Press the + button to reach P11.
If no other buttons are pressed, the cooker will begin to cook
You will hear three beeps, and the cooker will be set in this
Once the required pressure and temperature are reached, the
Once the cooking is finished, the cooker will beep, enter the
If left unattended for an hour, the display will show 1H (one
To cancel the setting, press the Keep Warm/Power button.
In Standby mode, press the Menu button. The display will flash
Press the + button to reach P11.
Press the Delay Timer button and set the delay time. See the
29