P02 Poultry; P03 Vegetables - John Lewis Pressure Cooker Instruction Manual

P02 Poultry

Poultry mode allows you to cook poultry like chicken, duck, and turkey.
In this setting, the pressure level and the cooking time are preset, so
they cannot be changed.
!
NOTE: make sure that the lid is in the closed position and the exhaust
valve is in the sealed position.
Function: poultry
Time: 20 mins
Pressure: yes
Temp: about 116C
Keep warm: yes
Normal mode
1 When the cooker is in Standby mode, press the Menu button.
The display will flash "P01".
2 Press the + button to reach P02.
3 If no other buttons are pressed, the cooker will begin to cook in ten
seconds in this setting and display P02 without flashing.
4 You will hear three beeps, and the cooker will be set in this program.
5 Once the required pressure and temperature are reached, the
cooker will display the cooking time and will start a countdown.
- Once the cooking is finished, the cooker will beep, enter the Keep
Warm mode, and display 0H (zero hours).
- If left unattended for an hour, the display will show 1H (one hour)
and so on.
- To cancel the setting, press the Keep Warm/Power button.
Delay Timer mode
1 In Standby mode, press the Menu button. The display will flash "P01".
2 Press the + button to reach P02.
3 Press the Delay Timer button and set the delay time. See the Delay
Timer section in Control Panel Functions for details.
!
TIP: refer to our recipes in this manual to try out a delicious poultry recipe.
20

P03 Vegetables

Vegetables mode allows you to cook various vegetables. In this setting,
the pressure level and the cooking time are preset, so they cannot be
changed.
!
NOTE: make sure that the lid is in the closed position and the exhaust
valve is in the sealed position.
Function: vegetables
Time: 5 mins
Pressure: yes
Temp: about 116C
Keep warm: yes
Normal mode
1 When the cooker is in Standby mode, press the Menu button. The
display will flash "P01".
2 Press the + button to reach P03.
3 If no other buttons are pressed, the cooker will begin to cook in ten
seconds in this setting and display P03 without flashing.
4 You will hear three beeps, and the cooker will be set in this program.
5 Once the required pressure and temperature are reached, the cooker
will display the cooking time and will start a countdown.
- Once the cooking is finished, the cooker will beep, enter the Keep
Warm mode, and display 0H (zero hours).
- If left unattended for an hour, the display will show 1H (one hour)
and so on.
- To cancel the setting, press the Keep Warm/Power button.
Delay Timer mode
1 In Standby mode, press the Menu button. The display will flash "P01".
2 Press the + button to reach P03.
3 Press the Delay Timer button and set the delay time. See the Delay
Timer section in Control Panel Functions for details.
!
TIP: refer to our recipes in this manual for ideas to cook vegetables.
21