Preset Programs; P01 Meat; Delay Timer Mode - John Lewis Pressure Cooker Instruction Manual

Preset programs

The pressure cooker allows you to choose between one of fifteen
preset programs.
1 When the cooker is in Standby mode, press the Menu button.
The display flashes P01 as default.
2 When the display is flashing, you will be able to choose other
preset programs by pressing the + and - buttons.
The display will stop flashing after ten seconds when no other buttons
are pressed. You will hear a beep sound and the cooker will be set in
the chosen program.
!
NOTE: you will not be able to change the preset program if the display
stops flashing. If you like to choose a different program, press the
Keep Warm/Power button to cancel the program and start again from
Standby mode.
Using the Delay Timer
- Choose any preset program, except Sauté, Slow Cook and Yoghurt.
- Press the Delay Timer button. The Delay Timer indicator light will
be ON and the display will flash 2:00 as default.
- Set the time after which you would like the cooking to begin. The
cooker will enter into your setting in 10 seconds if no other buttons
are pressed. The display will show the time after which the cooker
will begin to cook.
In all the preset programs, the pressure and the cooking time are preset.
This means you will not be able to change either of these parameters.
18

P01 Meat

Meat mode allows you to cook meats of various kinds. In this setting,
the pressure level and the cooking time are preset, so they cannot be
changed.
Note: make sure that the lid is in the closed position and the exhaust
valve is in the sealed position.
Function: meat
Time: 20 mins
Pressure: yes
Temp: about 116C
Keep warm: yes
Normal mode
1 When the cooker is in Standby mode, press the Menu button.
The display will flash "P01".
2 If no other buttons are pressed, the cooker will begin to cook in ten
seconds in this setting and display P01 without flashing.
3 You will hear three beeps, and the cooker will be set in this program.
4 Once the required pressure and temperature are reached, the
cooker will display the cooking time and will start a countdown.
- Once the cooking is finished, the cooker will beep, enter the Keep
Warm mode, and display 0H (zero hours).
- If left unattended for an hour, the display will show 1H (one hour)
and so on.
- To cancel the setting, press the Keep Warm/Power button.

Delay Timer mode

1 In standby mode, press the Menu button. The display will flash "P01".
2 Press the Delay Timer button and set the delay time. See the Delay
Timer section in Control Panel Functions for details.
!
TIP: refer to our recipes in this manual to try out a delicious meat recipe.
19