Ecotech Italia CLH Manual page 13

CLH
CABLE LAYER – NT 60
Dear Customer, thank you for having chosen this ECOTECH ITALIA product. We are certain that this machine will fully
meet you usage requirements. In order to obtain optimal performance from your cable layer, as well as to ensure its
proper maintenance over time, be sure to read all of the indications and warnings contained within this manual. This
manual must be preserved and must always remain with the machine for the duration of its working life.
READ THE USER INSTRUCTIONS CAREFULLY BEFORE STARTING THE MACHINE!
GENERAL ACCIDENT PREVENTION REGULATIONS
Always use extreme caution when operating the machine.
This user manual must be read carefully before using the machine for any work operations.
Various safety labels can be found upon the machine: these are not decorative elements! They serve to continuously
remind the operator of the damage and injuries which can result from improper machine use. Always pay special
attention to the hazards and warnings indicated by them.
This machine is equipped with an extremely sharp, rotating, steel cutter.
KEEP YOUR HANDS AND FEET AT A SAFE DISTANCE FROM THIS CUTTING DEVICE!!!
If the machine is sold or transferred to a third party for any reason, the party in question must be informed of the
above accident prevention regulations and must be provided with the machine's user instructions.
Before beginning any work operations, make sure that the terrain within the operating area does not contain any
objects which could be projected by the machine. Such objects could pose a serious hazard to anyone in the vicinity.
Keep people, animals and foreign objects at least 15 metres away from the machine while it is in function. In order to
avoid being struck by any projected objects, the operator must wear: A PROTECTIVE VISOR, COVERALLS, SAFETY
SHOES,
GLOVES AND A PROTECTIVE CAP.
Never perform maintenance upon the machine while the motor is running.
THE MOTOR MUST ALWAYS BE SHUT OFF BEFORE PERFORMING ANY INTERVENTIONS.
Do not tamper with or deactivate the machine's safety devices.
The operator shall always bear full responsibility for any injuries or damage caused to third parties.
The improper use of the machine on behalf of the operator shall void the machine's warranty and shall exonerate the
manufacturer of any responsibility.
If any machine malfunctions are encountered during work operations, contact your reseller's service centre for
assistance. NEVER ATTEMPT TO REPAIR THE MACHINE ON YOUR OWN. INEXPERIENCED REPAIR OPERATIONS CAN
LEAD TO MORE SERIOUS DAMAGE.
Always use original spare parts which have been supplied by the manufacturer.
PROFESSIONAL CABLE LAYER
13
1- Fuel cap
2- Motor starter handle
3- Gas throttle
4- Cutter activation regulator
5- Advancement regulator
6- Cutter activation lever
7- Handlebar swing-action control lever
8- Swing-action control regulator
9- Advancement activation lever
10- Cable spool
11- Motor oil cap
Fig.1