Downloading The T-Mobile Broadband App; Checking Lcd - Nokia T-Mobile Operator's Manual

ChapterTitleVariable

5.5 Downloading the T-Mobile Broadband App

5.6 Checking LCD

44
The LCD screen displays:
•
"CONNECTION" appears on the top of the LCD
•
up to four bars appears indicating signal strength
Download the T-Mobile Broadband App to your phone to configure the T-Mobile
High-Speed Internet Gateway. Create an account by scanning the QR code.
Locate the QR code on the bottom of the device or conveniently displayed on the
touch screen. Use the in-app QR code scanner.
The TMO Broadband app may ask you to enable the phone's Bluetooth in case it is
disabled.
Ensure that Bluetooth is enabled on your phone.
Note —
The T-Mobile High-Speed Internet Gateway pairs with your phone. When the
onboarding and initial configuration of the gateway is complete, "Pairing Complete"
appears on the LCD touch screen.
There are seven screens available on the T-Mobile High-Speed Internet Gateway
LCD after pairing:
•
Connection (Section 5.6.1)
•
Device (Section 5.6.2)
•
Battery (Section 5.6.3)
•
Settings (Section 5.6.4)
•
Messages (Section 5.6.5)
•
Alerts (Section 5.6.6)
•
Notification (Section 5.6.7)
Swipe the screen to move between displays. The dot on the bottom of the screen
indicates the screen that is displayed.
Check the 5G signal strength by looking at the touch screen on the top of the
T-Mobile High-Speed Internet Gateway. The T-Mobile High-Speed Internet Gateway
displays up to five bars to identify the signal strength. Figure
the LCD on the top of the T-Mobile High-Speed Internet Gateway.
Nokia 3TG-01275-AAAA-TCZZA
T-Mobile High-Speed Internet Gateway Operator
Manual
9 shows the location of
Issue: DRAFT