Configuring System Parameters - Nokia T-Mobile Operator's Manual

ChapterTitleVariable

9.8 Configuring system parameters

Procedure 24
86
12 Click Save Changes.
13 STOP. This procedure is complete.
The following tasks can be configured using the web GUI or LCD:
•
Reboot device using the web GUI or LCD (Procedure 24)
•
Factory reset using the web GUI or LCD (Procedure 25)
•
Firmware upgrade (Procedure 26)
•
Enable debug control (Procedure 27)
You will need to know the IP address of the T-Mobile
Note —
High-Speed Internet Gateway along with the user name and
password to perform these procedures. This information is
located on the label located on the bottom of the gateway.
Rebooting the T-Mobile High-Speed Internet Gateway using the web
GUI or LCD
Follow this procedure to reboot the T-Mobile High-Speed Internet Gateway using the web GUI:
1 If you have not done so yet, complete the steps in procedure 10.
The Overview Dashboard screen appears with the web GUI menu.
2 If you have not already logged in, log into the web GUI by completing the steps in
procedure12.
3 Select System from the web GUI menu.
The System screen appears
4 Click Reboot.
The T-Mobile High-Speed Internet Gateway reboots.
5 STOP. This procedure is complete.
Follow this procedure to reboot the T-Mobile High-Speed Internet Gateway using the LCD:
Nokia 3TG-01275-AAAA-TCZZA
T-Mobile High-Speed Internet Gateway Operator
Manual
Issue: DRAFT