Advertisement
STEP 4
STEP 5
STEP 6
WARNING:
Do not fully tighen now.
Attach runners (H) to assembled rocker and secure by using
Tapping screws (I) and small washers (J). Please make sure
the direction of runner is correct.
Verify the alignment and adjust, fully tighten all the screws
now. Put cushions on the rocker. The rocker is assembled.
THIS ROCKER IS NOT A TOY. DON'T OVER-
ROCK THE ROCKER. IT MAY MAKE THE
ROCKER TIP OVER AND RESULT IN INJURY.
Advertisement
