Furuno NBDP DP-6 Installation Manual page 13

Terminal Unit
Printer
Mounting Fixture(1)
CP16-00501
8
1. Fix the hanger to the table with four tapping screws, referring to
outline drawing on page D-2.
2. Attach connectors to bottom panel. (See next page)
3. Set the terminal unit to the hanger with two knobs.
4. Adjust the display screen so it can be easily viewed and tighten
knobs.
Leave at least 80 mm at the sides and rear to permit the checking and
maintenance.
Keyboard
1. Attach the four "hook loop fasteners 3" (small ones) to the bottom
of the keyboard.
2. Attach the four "hook loop fasteners 4" (large ones) to the "hook
loop fasteners 3" attached to the keyboard bottom.
3. Remove seals from the "hook loop fasteners 4".
4. Set the keyboard on the mounting location and press down firmly.
Fix the printer to mounting location with two printer fixtures (sup-
plied).
380
405
425
4-φ 6.5
20
Fixing holes
Mounting Fixture(2)
CP16-00502