Wheel Balancing - MOTO GUZZI V 50 Owner's Manual

u ndo was he red n u t
•
drive box side;
undo screw «8» securing wheel spindle t o
•
rear swinging ann;
take off wheel spindle
•
hub and swinging arm;
slip off spacer «E»;
•
lean the motorcycle to the right to where the
•
wheel can drop out.
To re-fit the wheel reverse the d ismantling ope­
rations.

Wheel balancing

To improve stability and decrease vibrations at
high speeds, the wheels have to be p r o p e r ly
balanced.
A
good balancing is obtained as fol lows:
remove the wheel and set it up on a forked
•
stand;
spin the wheel lightly several ti mes and watch
•
if it stops always i n different positions. If so, the
wheel is correctly balanced;
«A» on wheel s p i n d l e ,
«D»: drive box, wheel
if one point of the wheel always stops at the
•
bottom, put a su itable weight on the opposite
side;
repeat the operation until the wheel is correc­
•
tly balanced.
33